Quality | Segmentation | Processes & Industrialization
13.11.2023 - Reading time: about 1 minute
With our latest systems, BPS® Flex and EPS® Flex, we produce mass-produced parts right from the start.
Read full articleNews & Blog
Quality | Segmentation | Processes & Industrialization
08.06.2023 - Reading time: < 1 minute
A holistic approach is required to create something new. SWD has perfected this and creates unique solutions.
Read full articleQuality | Processes & Industrialization
10.03.2023 - Reading time: about 3 minutes
The technologies for bonding electrical sheet are different and have a major impact on the stator and rotor stacks.
Read full articleQuality | Segmentation | Processes & Industrialization
24.11.2022 - Reading time: < 1 minute
When stators and rotors are punched, the various process steps cause mechanical stress in the electrical sheet. This stress impairs the magnetic properties of the lamination stack. We have the solution.
Read full articleProcesses & Industrialization | Success Stories
21.10.2022 - Reading time: < 1 minute
We reduce tolerances! The customer, a vehicle manufacturer, builds their electric drives on the basis of segmented stators with 12 or 18 segments.
Read full articleAbout us | Processes & Industrialization
27.04.2022 - Reading time: about 2 minutes
Electric drive technology is a key element in reducing global CO2 emissions. Our technologies are helping to improve the balance of the electric motor.
Read full articleProcesses & Industrialization | Success Stories
04.04.2022 - Reading time: < 1 minute
Bonding varnish (Backlack) enables new motor concepts. The customer, an e-mobility start-up, is looking for a partner who is able to produce the highly innovative lamination stacks.
Read full articleSegmentation | Processes & Industrialization
20.11.2021 - Reading time: < 1 minute
The BPS® technology for the fully automated, fast, efficient, and energy-saving production of stator segments has been developed and mass-produced by SWD with partners such as Schuler, GF and others over the past 10 years.
Read full articleAbout us | Quality | Processes & Industrialization
27.02.2021 - Reading time: < 1 minute
With our BPS® technology, we have produced over 3 million bonded single teeth in the last 12 months. The fully automated process delivers TOP quality, which is reflected in ZERO error messages over the past 12 months.
Read full articleQuality | Technologies | Processes & Industrialization
05.08.2020 - Reading time: < 1 minute
After four years of development and a subsequent construction time of one year, our first large-scale series EPS® system has gone into operation.
Read full article